If for any reason you are not satisfied with your gear in the first 30 days – enjoy no hassle returns. This applies only to new products purchased directly from goalzero.com. All products are covered from defects under normal use for up to two years. For more information, visit Warranty & Returns in our Support center.

0
20 Amp Charge Controller
20 Amp Charge Controller
20 Amp Charge Controller
20 Amp Charge Controller
SKU: 96110
20 Amp Charge Controller
$99.95

Monitor and regulate solar input for 12V batteries with the 20 Amp Charge Controller. Designed to integrate seamlessly with Goal Zero solar panels, the charge controller comes with a pre-installed High Power Port and an easy-to-read LED screen. Equipped with an IP65 rating, the charge controller is weather resistant and dustproof, allowing for protection against the elements when powering off-grid adventures or outdoor equipment.
... more
California residents:WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Charging & Power

Tech Specs

Q&A

In The Box

Charging & Power

20 Amp Charge Controller

Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 watts and below, we recommend the [10 Amp Charge Controller](https://www.goalzero.com/shop/accessories/10a-charge-controller/). For solar charging with more than 100 watts, we recommend the 20 Amp Charge Controller.

Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 watts and below, we recommend the 10 Amp Charge Controller. For solar charging with more than 100 watts, we recommend the 20 Amp Charge Controller.

Charge Controller comes with an integrated High Power Port for connecting to Goal Zero Boulder 200 solar panels. To connect and charge a 12V battery, you must purchase the [Spade to SAE Cable](https://www.goalzero.com/shop/accessories/spade-sae-cable/) and additional cable adaptors. We recommend either the [SAE to Ring Terminal](https://www.goalzero.com/shop/accessories/sae-ring-terminal/) or [SAE to Alligator Clip](https://www.goalzero.com/shop/accessories/sae-alligator-clip/)

Charge Controller comes with an integrated High Power Port for connecting to Goal Zero Boulder 200 solar panels. To connect and charge a 12V battery, you must purchase the Spade to SAE Cable and additional cable adaptors. We recommend either the SAE to Ring Terminal or SAE to Alligator Clip

Will not work with Yeti X Power Supply

Will not work with Yeti X Power Supply

20 Amp Charge Controller
Tech Specs
Ports
  • Input/Output terminal: M5 terminals
  • Solar Input Port (High Power Port): 14-23V, up to 14A
  • Fuse: 30A replaceable
Battery Details
  • Charge Controller: PWM
  • Rated solar panel amps GZ-10: 20A
  • Normal input solar cell array voltage: 15-22V
  • Max solar cell array voltage (output has no load): 25V
  • Lowest operating voltage at solar or battery side: 8V Minimum
  • Charging Characteristics:
  • Start Voltage at 25°C: 3-10V
  • Charge Voltage at 25°C:
  • LTO battery: 14.0V
  • Gel battery: 14.1V
  • LiFePO4 battery: 14.4V
  • Charge Voltage at 25°C: AGM battery-14.4V
  • WET battery: 14.7V
  • Calcium battery: 14.9V
  • Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
  • Float Voltage at 25°C:
  • Gel, AGM, WET, Calcium batteries-13.6V
  • LTO and LiFePO4 batteries-13.4V
  • Battery temperature compensation coefficient: -24mV/°C
General
  • Product SKU: 96110
  • Weight: 17.6oz (499g)
  • Dimensions: 6.10 x 3.90 x 1.02in (15.5 x 9.91 x 2.6cm)
  • IP Grade: IP65
  • Spade to HPP Cable Length: 3ft
  • Operating temperature: -25 to 50°C/ -13 to 122°F
  • Warranty: 12 Months
  • Certs: IC, FCC, CE-EMC, CE-LVD
Q&A
In The Box

What's in the Box

  • 20A Charge Controller
  • Spade to HPP Cable
What's in the Box

Compatibility

Compatible with the Nomad 200 and Boulder 200 Briefcase. Charge controller can be installed directly on a Boulder 200 Briefcase with available Boulder Charge Controller Mounting Bracket.
Still have questions? Give us a call.
top